Category Archive: Vu+


Firmware: Vu+/Vusolo & DM800SE (12.22-Sim210-84.B.riyad66.nfi)


Firmware image for the Vu+, Vu Solo, Dm800SE and other Enigma 2 based satellite receivers that are clones or compatible. Has CCcam 2.3.0 & CCcam 2.21 plugins preinstalled, more information is in the post.


How to guide: Improving CCCam performance by controlling extra reshares

How to correctly setup CCCam to limit users who are many hops away from the local card, this will improve overall performance for everyone.


Firmware: OpenPLi Turko DM500S BlackGlass HD (Meteor)

Premade OpenPLi firmware image for the Dreambox DM500S satellite receiver. Has CCCam (2.2.1) preinstalled and some other plugins. Available in German, English, Turkish, Italian & French.


How to guide: Automatic CCcam 2.2.1 Installer script for Debian 6 Linux based PCs

A how to guide on how to install CCCam 2.2.1 on Debian Linux based PCs which are being used to run emulators, media centers, card sharing services etc. the automatic script takes care of everything.


Info: Back in stock various satellite receivers (Dreambox, OpenBox, Vu+, Technomate etc.)

A new section we will be running and updating showing a list of what satellite receivers are in stock or back in stock, since they seem to go out of stock fairly quickly due to the constant supply problems in this market. We also will be working on a widget that shows real time stock …

Continue reading »


Info: Important emulator/softcam file locations (Dreambox, OpenBox, AzBox, Vu+ etc.)

A small list of card emulators/softcams and there important file locations, useful for finding the configs, keyfiles etc.


How to guide: Configure OsCam for a Dreambox Dm500s

A PDF guide showing how to configure the OsCam card emulation (softcam) software for a Dream Multimedia Dreambox DM500S satellite receiver and its clones (LinuxSat, EagleSat, V8 etc.)


How to guide: Check if CCCam is running and restart if needed.

A small script to run & save on your box that will check if CCCam is running and restart it if it has crashed/stopped responding. More useful for box’s or PC servers being used as card sharing setups.


How to guide: Using Smargo cardreader with CCcam on Linux based receivers and PC servers.

A how to guide on how to setup a Smargo smart card card reader running via CCCam on a Linux based satellite receiver or a Linux based PC card server.


How to guide: How to edit CCcam.cfg using Shell commands (Telnet etc.)

A quick short guide on how to edit the CCCam.cfg file using shell commands, covers adding & editing users/Clines/Nlines etc.


How to guide: Gemini 3 CCcam restart & check script for CCcam 2.2.x

A restart script for Gemini 3 based firmware/images for CCCam versions 2.2.x. May be of use to some Dreambox/Enigma based receiver owners.


How to guide: Installing CCcam on Dream Elite or BlackHole Images (Firmware)

Short guide on how to install the CCCam softcam software on a satellite receiver (Dreambox, Openbox, Vu+ etc.) that is running/supported by DreamElite or Blackhole firmware iamges.


How to guide: Fline (f:line) settings, setup, syntax and what it all means.

Following on from the guide on Clines, here is a guide on the correct settings and syntax for a Fline (f:line) guide explains what each part does and how it relates to your cccam settings on your receiver (Dreambox, AzBox, Openbox, VU+etc.)


How to guide: How to setup CCCam Clines & Flines

A advanced step by step guide to installing, setup and configuring CCcam CLines & FLines.


How to guide: Use Mgcamd with CCcam and Newcs

This guide shows how to use MgcamD with CCCAM & NewCS. Covers setup and adding C and N lines. The examples shows a Azbox but this guide will work on other Enigma & Enigma 2 based linux satellite receivers (Dreambox Dm500S, Eagle Box, Vu+, Azbox, Spiderbox etc.).