«

»

Jul
30

How to guide: Using Smargo cardreader with CCcam on Linux based receivers and PC servers.

A how to guide on how to setup a Smargo smart card card reader running via CCCam on a Linux based satellite receiver or a Linux based PC card server.

streaming sky satellite tv software discounted

DM7020 CCcam.cfg
SERIAL READER : /dev/usb/tts/0 smartreader+
SERIAL READER : /dev/usb/tts/1 smartreader+
SERIAL READER : /dev/usb/tts/2 smartreader+
SERIAL READER : /dev/usb/tts/3 smartreader+

DM800 CCcam.cfg
on USB0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
on USB1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1

PC server CCcam.cfg


SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
SERIAL READER : /dev/ttyUSB3 smartreader+

Now we need add to CCcam.cfg new line:
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+

or whatever USB port your smartreader is entered.

Save CCcam.cfg and run ./CCcam.x86 -d you should see new card is added and running.
In CCcam.cfg is card overklocking and there you just edit like so:
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000 and card works with 4.80mhz set by smartreader+.

Available frequencies :

3.20, 3.43, 3.69, 4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0 and 16.0 MHz

The user can selecte any freqency. The Smartreader+ will selected the nearest available.
Default smartreader+ speed is with new v1.3 firmware 3.69MHZ and most cards works with that speed.

 

 

 

 

 

 

 

 

1 comment

  1. Digital123 says:

    Can anyone explain how to have the smargo cardreader running with Gbox ubuntu server. Thx in Advanced!

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>