How to guide: Flash new firmware image onto Dreambox DM7020

Quick short guide on how to flash a new firmware image to the Dreambox DM7020 satellite receiver using DreamUp.

dreambox dm7000 satellite receiver manual & setup guide bookletFirst you will need DreamUp :




Official DreamMultimedia DreamUP

First disconnect the box from main power
start the program “DreamUp

select: comport 1 or 2
use network
if network: enter the local IP from your PC, enter a remote IP for your Box

press the “Connect” – button
and then connect the box to main power
please wait now

after the flash loader is transfered into the Box select the firmware by pressing
the “Flash” – button

select the firmware and click “open”

upload starts now, please wait

Box is flashing the new firmware into the flash memory, please wait

flashing done, press “OK”
press “disconnect then exit”
restart the box

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>